Product Description:
The weighing controller consists of two parts, one is the controller part and the other is the load cell part. The load cell converts the weight signal into an electrical signal and sends it to the controller part through the transmission cable, and the controller part performs calculation and processing to complete the weighing of the elevator. When the weight in the elevator car changes, the controller can output multiple sets of relay contact signals as required, as well as 0~10mA current signal or 0~10V or -10V~+10V voltage signal. Elevator weighing and starting provide accurate data.
Features:
- Product Name: Strain Gauge Load Cell
- Capacity: 800 Kg
- Protection: IP65
- Temperature Effect on Zero: ≤0.02 %FS/10℃
- Linearity: 0.2 %FS
- Ultimate Overload: 150%
- Accuracy: High Precision
- Operating temperature: -20℃~80℃
Dimensions:
Technical Parameters:
| Parameters | Unit | Value |
| Capacity | Kg | 800 |
| Sensitivity | mV/V | 2.0±0.05 |
| Accuracy | | ≤±0.05 |
| Creep(15min) | %FS | ≤±0.02 |
| Input Resistance | Ω | 1000±10 |
| Output Resistance | Ω | 1000±10 |
| Insulation Resistance | M Ω | ≥5000(100VDC) |
| Zero Balance | %FS | ≤±1 |
| Temperature Effects on Span | %FS/10℃ | ≤0.02 |
| Temperature Effect on Zero | %FS/10℃ | ≤0.02 |
| Rated Temperature Range | ℃ | -10～+60 |
| Operating Temperature Range | ℃ | -20～+80 |
| Proposed Excitation Voltage | V | 6～12 |
| Allowed Excitation Voltage | V | 18 |
| Safe Overload | %FS | 120 |
| Ultimate Overload | %FS | 150 |
| Protection | | IP65 |
| Cable specification | mm | Ф5 |
| Cable length | m | 1.4 |
| Material | | Aluminum Alloy |
Applications:
The load cell adopts bridge-type strain gauge sensor and applies smooth installation technology to ensure long-term stable operation. The load cell provides a variety of installation methods, and can be installed on the car bottom of the elevator with a living car floor, the rope end plate of the elevator, the wheel shaft of the elevator car top, and the top of the beam of the elevator car top, etc., and used in conjunction with the controller.
Packing and Shipping:
Strain Gauge Load Cell is shipped in a strong, corrugated cardboard box that is lined with bubble wrap for additional protection. The box is printed with the product's name and a barcode for tracking. Additionally, a packing slip with the customer's name and address is included. The box is sealed with packing tape, and a shipping label is affixed to the outside.
FAQ:
1. What detailed information do I need to provide if I want to place an order?
We need to know the following information: Capacity, Usage and other related parameters you need.
2. Do you have any discount?
Yes, if you buy large QTY, please send us a email, we will give you a big discount.
3. What terms of payment are available?
We accept T/T, L/C, Trade assurance, Secure payment, Western Union, Paypal, Money Gram, etc.
4. How do you ensure good product quality?
We have a complete quality control system, all of our products are fully checked by IQC, OQC departments before shipping to our clients.
